Din-rail Type Electronic Energy Meter

Product description

The meter is used to measure 50Hz or 60Hz active energy consumption from AC electricity net. The features small size&Din-Rail mounting makes it suitable for installation in distribution boards and small standard enclosures.The meter is widely used in the office buildings ,shopping malls ,residences,airports and metro,etc.

Specifications

♦Single phase optical energy meter

♦4 module 76 width

♦ Power indicator Anti-tampering

♦LCD display,AMR

♦IEC62053-21

Functions and Features

♦35mm standard Din-rail installation or front board setting,complying with standard DIN EN50022.Or front board setting (mounting holes center distance 63mm),user can choose any one by themselves

♦ 4 module 76 width

♦Cyclometer display(standard 6+1,or 5+1 digit).May select LCD display with backlight or LED display.

♦Standard configuration one port of pulse output passive(polarity),may select increase a distant port of pulse output passive(non-polarity).And contact with all kinds of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.

♦Bicolor LED introductions respectively power supply state（green） and signal of energy impulse（red）

♦Standard configuration don’t detect direction of the trend of load current .May select automatically detect the direction of the trend if load current.And instructions(Only red power pulse signal when working,that is meaning the load current reverse).

♦Single direction measures single phase two wire active power consumption.It is nothing with direction of the flow of load current ,complying with standard IEC62053-21,IEC62052-11

♦Directly connect operation or through CT OR PT&CT

Functions and Features

♦Standard configuration short terminal cover,which is helpful to reduce installation space and make it convenient to install; May select extended terminal cover,which is for protecting the safety of using electricity.

Optional Functions

♦Anti-tampering function are available;

♦Optical port or far infrared port,RS485(Modbus) output interface (optional)enable remote data transfer ,remote control reading and parameter setting;

♦Muti-tariff is available (optional TOU or step tariff);

Technical Parameters